front/rear bumper removal
Moderator: bajabob
-
The Distance
- Scoobytruck Contributer
- Posts: 21
- Joined: Sun Jan 28, 2007 5:37 pm
- Location: Edmond, OK
front/rear bumper removal
I'm going to be swapping out some exterior pieces with a friend who will soon be trading in his Baja. Are there any diagrams available for cladding and bumper cover removal? Or suggestions from those who have done this in the past?
-
YBajaSteve
- All-Mighty Scoobytruck Admin
- Posts: 354
- Joined: Mon Jul 07, 2008 2:47 pm
- Location: Moving to the UK
Re: front/rear bumper removal
I think there is instructions in my hayes manual. Look into getting one of those, it helps with everything!
Check out more pics!<<<<<< Cardomain Page. *******SOLD THE BAJA*********** But im still around, PM me if urgent!
Re: front/rear bumper removal
The rear bumper is really easy, just make sure you get all the clips off and then just pull backwards on it.
The front bumper is a little more work. There are quite a few clips, and there are two screws that are behind the fender liner. You'd also have to remove your fog lights.
To find where the clips are, you can look at a parts diagram. You can find them at sites that sell parts, Autocenter.net has them. Just navigate to the part you need and click on "show illustration"
It should give you a good idea where the clips are.
The front bumper is a little more work. There are quite a few clips, and there are two screws that are behind the fender liner. You'd also have to remove your fog lights.
To find where the clips are, you can look at a parts diagram. You can find them at sites that sell parts, Autocenter.net has them. Just navigate to the part you need and click on "show illustration"
It should give you a good idea where the clips are.