Activity/sport light switch

[Rizzo]

Subarupartsforyou.com has access to the Switch and Bezel.

They have access to IIRC 18 switches and 11 Bezels.

Total with shipping was $82.51.

This is a great way to use the factory wiring harness and get a factory look for your lights you can buy else where like Amazon..

It is up to you to make sure you do NOT install lights that are of a higher volts or amps than the factory wiring was designed to handle. Things could either melt and cause a fire or shot and if that didn't happen the higher gauge wire may not deliver high enough voltage and your new lights will be dim.

Switch part and lamp part #'s

Switch H1410LS070
Bezel 66208AE36A




Here is the link they gave me.

When they're gone , they're gone!

Forever.

http://www.subarupartsforyou.com/cp_par ... rtid=23884

[Hawk296]

Your Bezel is upside down

[Rizzo]

[mikenmel08]

Would you mind taking a close up picture of the back of that switch?

[Rizzo]

[Rizzo]

If you push a tab on that blue piece it slides right out.

This seems to be just for alignment purposes to ensure correct connection to a specific plug.

I assume you can remove that and plug it into a different harness, Or use another switch in this harness via the same technique.

Don't know for certain.

[mikenmel08]

That's what i was wondering also , i would like to use this switch but not with the factory wiring......Will have to do a little research... I think the blue thing is a lock to keep the connector from coming unplugged unintentionally...could be wrong though...anyways thanks for the pic

[Rizzo]

If I can't dig up a diagram, I can meter it out for you and find the circuit closed pins so you can just run power in and out for the switch function.

I don't exactly know how I'd go about testing or producing the ON light illumination circuit.


I bet this is the same...

[mikenmel08]

Found this on All Data , Don't know if it will help anyone but figured it might....

[Rizzo]

That's awesome!

What year was that for ?

[Rizzo]

Can you find out more about the Parking Brake switch connection?

I'd like to find out what to tie together so they work without the "One Click Cheat".

[mikenmel08]

05 turbo but looked the same for all years

[mikenmel08]

Can you find out more about the Parking Brake switch connection?

I'd like to find out what to tie together so they work without the "One Click Cheat".

I will look into that for you...

[Rizzo]

awesomesauce

[mikenmel08]

Can't find anything on All Data about that switch.....I've never taken mine out, do you know how many wires are going to it?