Any good recommendations on where to get a good quality axle? I've looked all over ebay, but of course all the pictures look the same. Havent priced an oem from the dealer, but expect it would be expensive...
Peace!
![[smilie=666.gif]](./images/smilies/666.gif "666"){kind=small}
Front CV/drive axle question
Moderator: bajabob
-
sfeather11
- Scoobytruck Master
- Posts: 157
- Joined: Tue Sep 29, 2009 7:07 pm
- Location: Southeast PA (near PA/MD/DE state lines)
Front CV/drive axle question
Hey all, I'm going to be changing out my front driver side axle soon (the inner boot has been torn for a few months now and I'm starting to hear grinding when I'm turning). I've seen a few vids on how to change it and it looks like I can handle it with no prob. Question though, do the 2003 Bajas have the roll pin holding the shaft to the trans? I seem to remember seeing somewhere that Subaru switched to a "C" clip or something around 2003?? Also, what recommendations do you have for moving the knuckle out of the way, removing the 2 strut bolts to drop it down or removing the lower ball joint mount?
Any good recommendations on where to get a good quality axle? I've looked all over ebay, but of course all the pictures look the same. Havent priced an oem from the dealer, but expect it would be expensive...
Peace!
Any good recommendations on where to get a good quality axle? I've looked all over ebay, but of course all the pictures look the same. Havent priced an oem from the dealer, but expect it would be expensive...
Peace!