any one know of a good skid plate

infantry_baja · Post by **infantry_baja** » Sun Jun 20, 2010 4:11 pm

I need a new skid plate since South Carolina decided to claim mine. So I went on Rallitek and they didnt have any listed for the Baja. Any help from the scoobytruck community will be greatly appreciated.

gifters · Post by **gifters** » Mon Jun 21, 2010 1:15 pm

Rallitek seems to be discontinuing a lot of products... doesn't make sense because your old cars have more wear and will need the replacement parts, I bought the SSI skid plate before they took it off there site, now I'm looking to get HD springs but they're gone.

Ahzlon · Post by **Ahzlon** » Mon Jun 21, 2010 8:16 pm

Check out http://www.get-primitive.com/ *primitive motorsports*. They have very nice skid plates for both the front and rear of the Baja. Just click on the Skidplates and Underbody link. Then from the choice of Subarus choose BAJA!

ta da! and they have a few different flavors too. GOOD LUCK

I plan on getting front and rear skids by next summer.

YBajaSteve · Post by **YBajaSteve** » Tue Jun 22, 2010 5:51 am

yeah those look pretty good. if anyone gets one/either make sure you come back on here and tell us how well they fit!

gifters · Post by **gifters** » Tue Jun 22, 2010 7:02 am

Rallitek has discontinued there Baja Skidplate (and HD rear springs) because they weren't popular... they'll do group runs of some stuff 20-25 pieces.

Anyone want to go on a group buy of HD Springs

Ahzlon · Post by **Ahzlon** » Tue Jun 22, 2010 7:10 am

I think I"ll stick with Primitive. I have seen a few of their skidplates on a couple of semi-local Imprezas. Good quality work. That's one thing I hope to have just before or after winter is a front and rear skid plate.

spazchicken · Post by **spazchicken** » Thu Jun 24, 2010 2:33 pm

I have a primitive skidplate but have yet to install it.

360joules · Post by **360joules** » Wed Jul 21, 2010 10:04 pm

I plan to get the front and rear skid plates from Primitive in the next couple weeks. They also have King springs that should gain me another inch of clearance. All of those will be VERY welcome as I really don't like bottoming out on the forest roads.

gifters · Post by **gifters** » Thu Aug 12, 2010 7:52 pm

360 any word on the king springs?

Leon in PA · Post by **Leon in PA** » Sat Oct 31, 2020 4:52 am

gifters wrote: Tue Jun 22, 2010 7:02 am Rallitek has discontinued there Baja Skidplate (and HD rear springs) because they weren't popular... they'll do group runs of some stuff 20-25 pieces.

Anyone want to go on a group buy of HD Springs

Rallitek has the Baja Skid Plates back in stock

https://www.rallitek.com/skid-plate-bod ... -2006.html

greymud · Post by **greymud** » Wed Nov 04, 2020 10:15 am

Sorry I didn't see this thread earlier.

I have the front and rear primitive skidplates. The front fir perfectly, but I had to pound a dent in it for the fumoto valve I installed. They're both well scratched.

I would get the tranny plate, but it's for AT and I'm not sure it would fit my MT.

scoobytruck.com

any one know of a good skid plate

any one know of a good skid plate

Re: any one know of a good skid plate

Re: any one know of a good skid plate

Re: any one know of a good skid plate

Re: any one know of a good skid plate

Re: any one know of a good skid plate

Re: any one know of a good skid plate

Re: any one know of a good skid plate

Re: any one know of a good skid plate

Re: any one know of a good skid plate

Re: any one know of a good skid plate