![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Smile :)](./images/smilies/icon_smile.gif)
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/P1050500.jpg)
made it so i can detach easy if i need to take off the cargo basket
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/P1050501.jpg)
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/IMG_0102.jpg)
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/IMG_0104.jpg)
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/IMG_0105.jpg)
Ok first step - i figured out how i was going to run the wires into the car. i was able to wiggle and pry the top plastic off the truck, even tho the hayes manual and the subaru instructions say you have to take the whole bed apart.... i didnt..... but i did loosen the side plastic by taking apart all the clips i could remove on the right side around the sports bar.
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/P1050484.jpg)
- taking it apart
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/P1050485.jpg)
toook out the 4 screws
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/P1050486.jpg)
this is where i figured id run my wires thru
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/P1050487.jpg)
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/P1050488.jpg)
This is a pic of the completed top, i just ran the wire along the roof racks sides, and used black tape to secure them, this is what i assumed the subaru instructions for the sports lights is telling you to do, since i got some ideas from those, i dont know how long this will stay, i may have to figure something else out.
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/IMG_0002.jpg)
so i needed to take the interior pieces apart to be able to get at the wires, so i took the headliner down, just in the back, and the plastic interior moulding at the top
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/P1050489.jpg)
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/P1050490.jpg)
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/P1050493.jpg)
had to take the handle off too.
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/P1050492.jpg)
this is the wires running into the cab...
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/hella%20lights/IMG_0023.jpg)
my idea is to run the wire into the cab above the headliner and down the pillar between the front and back door.