![Image](%5Battachment=0%5Dvacuum%20line.jpg%5B/attachment%5D)
Help IDing hose while changing turbo Inlet
Moderator: bajabob
Help IDing hose while changing turbo Inlet
Hey everyone, so I am putting the Perrin inlet on my 2005 manual, which was not to bad to get on, since I was the turbo too. I am seeing what I think is a vacuum line when the evap diaphram hose connects to the blue connector under the manifold. It gray, and I dont remember seeing it when I pulled the stock inlet. I am going to try to attach a picture.
Its the gray circle next to the blue connector? It the last thing I gotta do before I can start it, any ideas?
![Image](%5Battachment=0%5Dvacuum%20line.jpg%5B/attachment%5D)
- Attachments
-
- vacuum line.jpg (101.26 KiB) Viewed 1167 times
- Guacamole
- Scoobytruck God
- Posts: 516
- Joined: Wed Jun 10, 2015 4:11 am
- Location: Eastern Shore, MD
- Contact:
Re: Help IDing hose while changing turbo Inlet
According to this it's the fuel line that goes to the purge valve, should be attached to a nipple under the blue nipple that is perpendicular to the blue nipple.airedoc1 wrote: ↑Mon Jul 26, 2021 1:55 pm Hey everyone, so I am putting the Perrin inlet on my 2005 manual, which was not to bad to get on, since I was the turbo too. I am seeing what I think is a vacuum line when the evap diaphram hose connects to the blue connector under the manifold. It gray, and I dont remember seeing it when I pulled the stock inlet. I am going to try to attach a picture.Its the gray circle next to the blue connector? It the last thing I gotta do before I can start it, any ideas?
https://forums.nasioc.com/forums/showth ... ?t=2785571
![Image](https://external-content.duckduckgo.com/iu/?u=https%3A%2F%2Fparts.subaru.com%2Fimages%2Fparts%2Fsubaru%2Ffullsize%2FS11_05001480.png&f=1&nofb=1)
![Image](https://external-content.duckduckgo.com/iu/?u=http%3A%2F%2Fi.imgur.com%2FgKimk8m.jpg&f=1&nofb=1)
![Image](https://guasitory.neocities.org/ribbons/scoobytruck_ribbon_akira1.gif)
Re: Help IDing hose while changing turbo Inlet
I think you're right, thanks for pointing that out!