2.5 Engine that will drop / fit in our BAJA

Technical Discussions - Got a mechanical problem?

Moderator: bajabob

Post Reply
kmvbaja
Scoobytruck Lurker
Posts: 10
Joined: Mon Sep 15, 2008 11:56 am

2.5 Engine that will drop / fit in our BAJA

Post by kmvbaja »

My BAJA has that cylinder slapping issue. It is still running perfect after warm up but may have to replace it sooner than normal. Therefore, when I'm searching for a 2.5L engine down the road, which year and modle of subaru engine will drop in our BAJA without extra modification???? Or which engine code will work for our car.

i.e.,... Can I use 2.5L from impreza, forester, .... from 2003-2007 ... etc... [smilie=666.gif]
mct
Scoobytruck Lurker
Posts: 6
Joined: Wed Jan 14, 2009 3:06 pm

Re: 2.5 Engine that will drop / fit in our BAJA

Post by mct »

Check your Pm's
I have a full 20 000 mile drivetrain available.
txrhubarb
Scoobytruck Lurker
Posts: 7
Joined: Sun Jul 27, 2008 2:37 pm

Re: 2.5 Engine that will drop / fit in our BAJA

Post by txrhubarb »

I dug up this old post that is relevant to my interest, as I have to replace the engine in my 2003 Sport 5-speed.

Can anyone with experience please tell me what other used/salvage engines I need to search for and if they actually fit?

Wikipedia's page about the EJ Engine says the EJ251 fits the following models:

EJ251
Flat four EJ251

SOHC Intake volume is calculated by the use of a MAP sensor, unlike the EJ253 which uses a MAF sensor. Compression ratio is 10.0: 1.

Power ISO: 123 kW (165 hp) @ 5600 RPM
226 N·m (167 ft·lbf) @ 4000 rpm

Usage:

* Impreza 2.5RS, 2.5TS 00-04 (US)
* Impreza Outback Sport 02-04 (US)
* Forester 00-04 (US)
* Legacy 00-04 (US)
* Outback 00-04 (US)
* Baja 03-04 (US)


My engine code is EJ251AWEWL. Can just any E251 from the above models work or is the suffix AWEWL important? Do I have to find a 5-speed?

Please help me if you know. I am dead in the water and searching for Baja parts notoriously turns up few results and even then the information is often incorrect.

Thanks!
Post Reply