![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/Grill%20Mod/IMG_2570.jpg)
These are the beams I planned to cut out with a dremel.
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/Grill%20Mod/grillwork.jpg)
So after a year of driving, it has started chipping and needed a repaint, so I decided to finally start my mod...
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/Grill%20Mod/IMG_0090.jpg)
I plan on filling the holes in and then putting some black mesh back there. Still looking for the right type of mesh pattern that I like.
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/Grill%20Mod/IMG_0088.jpg)
Ive never done anything like this, so I hope Im using the right stuff, for now, I went with some plastic weld type of epoxy stuff. I already went thru one tube, need to go get more tonight. and heres my progress. I used the cross member pieces, to fill in the holes. I just outlined them with a marker and then cut them out.
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/Grill%20Mod/IMG_0096.jpg)
and then started epoxying them in place.
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/Grill%20Mod/IMG_0099.jpg)
![Image](http://i94.photobucket.com/albums/l111/Wettern/Car%20stuff/Grill%20Mod/IMG_0101.jpg)
The curve of the piece around the Suby Emblem is going to be the most difficult, hopefully I can get it to work out. I also hope I can sand this stuff down... Its all a learning process for me, so any tips are appreciated! Ill keep you guys posted on my progress!