Turn signals work. Hazards on constant (no flash)

Technical Discussions - Got a mechanical problem?

Moderator: bajabob

Post Reply
jaredmalcolm
Scoobytruck Lurker
Posts: 1
Joined: Wed Sep 06, 2017 8:57 am

Turn signals work. Hazards on constant (no flash)

Post by jaredmalcolm » Wed Sep 20, 2017 5:04 am

I just bought my Baja and got the car back from a motor rebuild and I'm starting to work through the bits that don't work.

The first thing on the list is the hazards. When attempting to turn the hazards on. All four turn signals turn on constant, but the turn signal switch still causes the lights to flash as expected.

Is there a separate relay for the hazards? I'm eventually going to move to led lights so at some point I'll need to move to a compatible flasher anyway.

User avatar
anarchy1024
Scoobytruck Master
Posts: 285
Joined: Mon Apr 12, 2010 4:07 pm
Location: Santa Clara, CA (Originally Toronto, ON)

Re: Turn signals work. Hazards on constant (no flash)

Post by anarchy1024 » Fri Sep 22, 2017 11:07 am

Probably the first thing to check is make sure the hazard switch is connected properly. The wires are pretty short and the clip can sometimes get broken. If that's fine, wiring diagram is here:
http://jdmfsm.info/Auto/Japan/Subaru/Ba ... System.pdf

Looks like there's only one flasher relay.

Post Reply