Compatiable Subaru OEM Bolt On Suspension

[ChrisIB]

I have a 04 Turbo and I would like to change my suspension to a lower profile. I would like to go the OEM route. I was wondering if I could buy a 04 STI shock and struts and bolt them on. If the "STI" is not a good option then maybe a wrx or any Subaru that will enhance the suspension in handling and corner and such things of that matter. I know sway bars and end links will need to be changed as well and that in it's self brings up another question. Can I also bolt on say bars and end links from different models to enhance the suspension. I would like to thank y'all for your time.

[bajaguy]

I don't think STI rears are compatible, but I believe there is a guy on the facebook page who did it recently. Legacy GT stuff is compatible for sure.

[Acro2pilot]

STi rear struts are totally different. You could get a set of coil overs and lower it that way, you can also use the rear subframe from another model subaru (legacy wagon I *think*) And there are standoffs between the frame and subframe that you may be able to remove, I left mine in when I lifted it but as I recall they slip out easily but I can't recall for sure if there were on every bolt position so that you could pop them out and bolt the subframe closer to the frame, give it a look.

[ChrisIB]

Thanks guys very much. It looks like it will be coil overs then. I don't think I want to fabricate the sub frame. I just made a ass out of myself and assumed the shocks and struts were interchangeable due to so many other parts being interchangeable. My wife has a 06 Outback and I wanted to do the same thing. I don't have brand new car money so I try to do what I can when I can. For example she needs new tires desperately. She has the standard OEM 06 Outback rim. I know the bolt pattern is 5x100 and I do believe the offset is 48 or close pease don't quote me. I bought a set of 2015 Crosstrek rims. I know they are 5x100 but I do believe the offset is a little different but it shouldn't be problem due to the fact she is using oem calipers. I don't plan on doing or a better description is attempt a brake upgrade any time soon. This allows me to keep her happy so I don't have to keep revolving in debt like these other smucks out here.

[anarchy1024]

Legacy GT stuff is compatible for sure.

So would it be safe to say these are compatible with the Baja?
http://www.amazon.com/gp/aw/d/B00361YN3 ... PDKIKX0DER

[bajaguy]

No idea if you would also need other stuff like struts, but it is my understanding that the suspension connections are the same for legacy, outback, and baja.

[bdover9876]

Not mine but a member of the Facebook group just swapped 2012 wrx suspension on his baja. He did have to reuse the baja top hats. Also, the rear struts will need a little modification. The hole on the bottom of the strut will need to be drilled out. The Baja uses a larger bolt.

[bdover9876]

I should have read the title a little better. What I mentions is compatible and oem but not completely a simple bolt on

[ChrisIB]

Thanks very much brother. That was the first picture I have seen. That sit pretty low. I really appreciate that. Looks like he has STI 17's on. That scoob definitely got slammed. I think I'm going to go the coil over route because of the adjustability. I'm not no tuner or specialist to say the least, but after a career change I have had ample time to appreciate all wheel drive turbo engineering meaning I like to tinker because I think it's the coolest ISH in the world. I didn't show y'all any pictures of my Scoob because I'm embarrassed. I have a 04 turbo 5 speed with 86 on the clock. I bought the vehicle last year as a toy because I find the power plant design and AWD aspect very interesting. The vehicle had a minor accident and the hood is damaged and the fourth gear grinds into gear only at high RPMS. I changed the fluid but it helped alit. I'm going to purchase a clutch and lightweight flywheel. I also just ordered "performance" shifter bushings lol we will see. I drove EURO's my whole adult life and I feel like a fool for missing out on many years. I will put a pic of the turd when it gets light out so you guys can get a good laugh. I just didn't realize how hard it is to get a hood.

[bajaguy]

Make one! Check out Paul's!
viewtopic.php?t=2531&start=120