need an answer quick! ecm swap 2005 and 2003
Moderator: bajabob
need an answer quick! ecm swap 2005 and 2003
I have a 2003 NA (non turbo) baja sport. Will the ECM from a 2005 NA be compatible?
Re: need an answer quick! ecm swap 2005 and 2003
Does anyone now where I can find this information at least?
Re: need an answer quick! ecm swap 2005 and 2003
I would assume there'd be no difference, but the safe bet would be to look at the numbers on the ECM's to see if they match at all...
Re: need an answer quick! ecm swap 2005 and 2003
Im trying to find out what I can about the ecm, but it seems like there are quite a few different numbers. Letter and number combination such as D1 seem to be very prominent on the actual units. Any idea what this may refer to?
Re: need an answer quick! ecm swap 2005 and 2003
Didn't the 05 get an upgraded engine that uses a MAF sensor instead of a MAP and has subarus avcs system?
From Wiki:
EJ251
SOHC Intake volume is calculated by the use of a MAP sensor, unlike the EJ253 which uses a MAF sensor. Compression ratio is 10.0: 1.
... Baja 03-04 ...
Ej253
SOHC - ISO 165 hp (123 kW) @ 5600 rpm, 166 ft·lbf (225 N·m) torque @ 4000 rpm. Intake volume is regulated by use of a MAF sensor, unlike the EJ251 which is regulated by a MAP sensor. I-Active valves (VVT intake side) on 06+ models.
... Baja 05+ ...
The 03 has the EJ251 and the 05 has the EJ253. So I'm guessing they're not compatible.
From Wiki:
EJ251
SOHC Intake volume is calculated by the use of a MAP sensor, unlike the EJ253 which uses a MAF sensor. Compression ratio is 10.0: 1.
... Baja 03-04 ...
Ej253
SOHC - ISO 165 hp (123 kW) @ 5600 rpm, 166 ft·lbf (225 N·m) torque @ 4000 rpm. Intake volume is regulated by use of a MAF sensor, unlike the EJ251 which is regulated by a MAP sensor. I-Active valves (VVT intake side) on 06+ models.
... Baja 05+ ...
The 03 has the EJ251 and the 05 has the EJ253. So I'm guessing they're not compatible.