My baja

General talk about the Subaru Baja.

Moderator: mikenmel08

Post Reply
Subatron
Scoobytruck Lurker
Posts: 14
Joined: Tue Jun 25, 2019 7:22 am

My baja

Post by Subatron » Wed Jun 26, 2019 3:21 pm

Hey guys! Been a long time reader of scoobytruck and just thought I’d show y’all some shots of my ride.

So here’s what I’ve got done...

Td05 16g
ESS intercooler
3”downpipe
Exhaust is completely Catless now
2” adf subframe spacer lift.
1”strut spacers
1.5” long travel coil overs
20mm hub spacers
2002 wrx rims
Primitive racing under armor.
USB outlets replaced cigarette lighters
2002 wrx front seats

Subatron
Scoobytruck Lurker
Posts: 14
Joined: Tue Jun 25, 2019 7:22 am

Re: My baja

Post by Subatron » Wed Jun 26, 2019 3:24 pm

EE8CD7BD-C742-4E9A-9ED5-1DC319E5C59A.jpeg
EE8CD7BD-C742-4E9A-9ED5-1DC319E5C59A.jpeg (3.1 MiB) Viewed 772 times
52583EAD-4FBC-49C9-BE1A-B4EF1D6DBE71.jpeg
52583EAD-4FBC-49C9-BE1A-B4EF1D6DBE71.jpeg (2.97 MiB) Viewed 772 times
5B91EBE5-DC35-4893-8DB1-5F88A6547364.jpeg
5B91EBE5-DC35-4893-8DB1-5F88A6547364.jpeg (3.57 MiB) Viewed 772 times

Subatron
Scoobytruck Lurker
Posts: 14
Joined: Tue Jun 25, 2019 7:22 am

Re: My baja

Post by Subatron » Wed Jun 26, 2019 3:24 pm

25EAA06C-8485-4438-8EF3-42B30B42A97D.jpeg
25EAA06C-8485-4438-8EF3-42B30B42A97D.jpeg (3.04 MiB) Viewed 772 times
B10642B1-677B-4217-A07E-1ED00108E95F.jpeg
B10642B1-677B-4217-A07E-1ED00108E95F.jpeg (3.2 MiB) Viewed 772 times
6285ABC2-8CCF-43D2-9208-BDBB60B5E4A5.jpeg
6285ABC2-8CCF-43D2-9208-BDBB60B5E4A5.jpeg (1013.31 KiB) Viewed 772 times

Subatron
Scoobytruck Lurker
Posts: 14
Joined: Tue Jun 25, 2019 7:22 am

Re: My baja

Post by Subatron » Wed Jun 26, 2019 3:25 pm

5E696299-0374-411A-A54A-6B62BEAA70F1.jpeg
5E696299-0374-411A-A54A-6B62BEAA70F1.jpeg (2.16 MiB) Viewed 772 times
ED60D41C-D836-4D31-B3AC-169C0ABB7CFC.jpeg
ED60D41C-D836-4D31-B3AC-169C0ABB7CFC.jpeg (2.19 MiB) Viewed 772 times
FF456FC0-8C94-4B39-ADFA-F766DC494A7B.jpeg
FF456FC0-8C94-4B39-ADFA-F766DC494A7B.jpeg (1.67 MiB) Viewed 772 times

Subatron
Scoobytruck Lurker
Posts: 14
Joined: Tue Jun 25, 2019 7:22 am

Re: My baja

Post by Subatron » Wed Jun 26, 2019 3:26 pm

94D17F5C-D05A-434F-824A-2B286BD31A73.jpeg
94D17F5C-D05A-434F-824A-2B286BD31A73.jpeg (651.13 KiB) Viewed 772 times
D4BF187A-8191-458A-9D7C-EB92FC0E52DE.jpeg
D4BF187A-8191-458A-9D7C-EB92FC0E52DE.jpeg (1.82 MiB) Viewed 772 times
39805812-93F3-4F45-8A9D-8F1316104964.jpeg
39805812-93F3-4F45-8A9D-8F1316104964.jpeg (2.03 MiB) Viewed 772 times

Subatron
Scoobytruck Lurker
Posts: 14
Joined: Tue Jun 25, 2019 7:22 am

Re: My baja

Post by Subatron » Wed Jun 26, 2019 3:28 pm

Also-

grimmspeed lwcp
Hybrid boost control setup

Subatron
Scoobytruck Lurker
Posts: 14
Joined: Tue Jun 25, 2019 7:22 am

Re: My baja

Post by Subatron » Wed Jun 26, 2019 3:29 pm

11A6E72B-27E9-4D3A-BE52-4AA96283495C.jpeg
11A6E72B-27E9-4D3A-BE52-4AA96283495C.jpeg (2.69 MiB) Viewed 771 times
04EC4094-0F49-4955-9CB3-1A40D8420B87.jpeg
04EC4094-0F49-4955-9CB3-1A40D8420B87.jpeg (616.27 KiB) Viewed 771 times
4907B2C7-E022-460F-BEA3-C098539923B5.jpeg
4907B2C7-E022-460F-BEA3-C098539923B5.jpeg (1.96 MiB) Viewed 771 times

oldpro
Scoobytruck Contributer
Posts: 62
Joined: Wed Jun 10, 2015 11:10 am
Location: New Mexico

Re: My baja

Post by oldpro » Wed Jun 26, 2019 5:31 pm

Nice overall, but to me photo #2 seems to show you have a whole lot of front wheel toe-out. Did your do an alignment after this photo was taken?

Subatron
Scoobytruck Lurker
Posts: 14
Joined: Tue Jun 25, 2019 7:22 am

Re: My baja

Post by Subatron » Thu Jun 27, 2019 3:20 am

  • there May be a bit of toe out but I had the wheel cranked to give it a meaner look. I am going to give her an alignment after I wrap her in Some general grabbers before winter

Subatron
Scoobytruck Lurker
Posts: 14
Joined: Tue Jun 25, 2019 7:22 am

Re: My baja

Post by Subatron » Thu Jun 27, 2019 8:38 am

also- I’m looking to shape my bumper in a similar fashion to the picture attached.

Do y’all have any suggestions on how I might go about this?

Subatron
Scoobytruck Lurker
Posts: 14
Joined: Tue Jun 25, 2019 7:22 am

Re: My baja

Post by Subatron » Thu Jun 27, 2019 8:40 am

D7D6FD81-3677-4139-B2CB-77331EC3A827.jpeg
D7D6FD81-3677-4139-B2CB-77331EC3A827.jpeg (83.1 KiB) Viewed 752 times
Subatron wrote:
Thu Jun 27, 2019 8:38 am
also- I’m looking to shape my bumper in a similar fashion to the picture attached.

Do y’all have any suggestions on how I might go about this?

User avatar
kamesama980
Scoobytruck Master
Posts: 295
Joined: Mon Feb 29, 2016 6:54 am

Re: My baja

Post by kamesama980 » Wed Jul 03, 2019 10:36 am

as for the bumper, depends on how close you want it to match... sawsall followed up with something to clean up the edges would get the job done but that bumper had different openings to start with too.

oldpro wrote:
Wed Jun 26, 2019 5:31 pm
Nice overall, but to me photo #2 seems to show you have a whole lot of front wheel toe-out. Did your do an alignment after this photo was taken?
Keep in mind when the wheels are turned there's something called Ackerman angle... the wheels don't stay parallel due to the different radii circles they follow.
-Russell
"You don't get to judge me for how I fix what you break"
03 sport 5mt
05 turbo 5mt vf39 and other STI bits, 3" turbo-back

Post Reply