Baja OEM switch options

General talk about the Subaru Baja.

Moderator: mikenmel08

Post Reply
sfeather11
Scoobytruck Master
Posts: 154
Joined: Tue Sep 29, 2009 7:07 pm
Location: Southeast PA (near PA/MD/DE state lines)

Baja OEM switch options

Post by sfeather11 » Mon Nov 27, 2017 8:52 pm

Hey all, Looking to add a few additional "bling" lights to my ride, but want to keep the switches looking oem. My plan is to replace the 1-switch cubby in the lower center stack (where the sport lamp switch is) with the jdm 3-switch cubby to gain 2 extra spots. My question is: Does anyone know what switches will work here? I'm thinking of just getting 2 extra fog lamp switches to use here. I'm thinking the oem subaru cruise, fog, cargo, and sport lamp switches will fit perfect here, but I would like something a little more unique. Anyone know of any other switch that will fit??

Peace! Scott

w.rohr
Scoobytruck Contributer
Posts: 60
Joined: Tue Oct 13, 2015 11:15 am

Re: Baja OEM switch options

Post by w.rohr » Tue Nov 28, 2017 10:59 pm

https://www.amazon.com/MICTUNING-Backli ... GTE25VV25S

This style will fit but you will have to cut out the tabs in the back of the cubby and cut the tabs off the switch but they will fit. Its a common size sometimes called carlington (I think thats the original brand).

sfeather11
Scoobytruck Master
Posts: 154
Joined: Tue Sep 29, 2009 7:07 pm
Location: Southeast PA (near PA/MD/DE state lines)

Re: Baja OEM switch options

Post by sfeather11 » Wed Nov 29, 2017 1:06 pm

Cool, thanks for the reply, I may give them a try. I think I used that switch style on my Jeep, but I cut the hole to fit...

If I cut the tabs off the switch, will it still fit snug and not jiggle around?

Peace!

w.rohr
Scoobytruck Contributer
Posts: 60
Joined: Tue Oct 13, 2015 11:15 am

Re: Baja OEM switch options

Post by w.rohr » Thu Nov 30, 2017 10:39 pm

There seems to be some difference between brands, but for the most part since you are pushing in so as long as you dont pull they sit fine.

Post Reply