Multi-Purpose Light/Brush Bar w/optional Skid Plate & Winch

[SVO1]

That UTV4000 is the winch on my car trailer, I pulled a 65 chevelle up with four flat tires, two of which had come off the rim. It is a very underrated winch!

[Skemcin]

That UTV4000 is the winch on my car trailer, I pulled a 65 chevelle up with four flat tires, two of which had come off the rim. It is a very underrated winch!

Thanks for the confirmation - comforting information.


Here is another picture of my car with the bar:


And, although this isn't a video to brag about (from a safety persepctive) here is the winch in "action" as we retention the cable:
http://www.youtube.com/watch?v=F5g9A_Nl4Zs

[bulwnkl]

Very interesting. I'm quite tempted! This is a very awkward time, as we're in the process of buying a house.

Tell me: Will the skid plate leave sufficient clearance for most aftermarket headers? Can I still change the oil with the skid plate in place, or will I have to remove it? If remove, how is it fastened on?

Thanks!

[Skemcin]

Very interesting. I'm quite tempted! This is a very awkward time, as we're in the process of buying a house.

Tell me: Will the skid plate leave sufficient clearance for most aftermarket headers? Can I still change the oil with the skid plate in place, or will I have to remove it? If remove, how is it fastened on?

Thanks!

Thanks for the reply.

I understand timing might be difficult for some. We are happy to pick this up later, as I mentioned. I don't want to rush anyone or make anyone feel like this has to happen now. If there is enough interest now - great. If not, I'll keep up with the post/conversation until it gains the momentum needed to get started.

As for the skid plate - we wanted to retain the strength and integrity of the skid plate so it is solid - no access holes for changing/draining oil. Although the Baja's eventual design may be different, the Impreza's bar is help on by 6 round head alan bolts. Its another 2 minutes and you can remove it with the car on ramps.

[bulwnkl]

Thanks for the info. If I am able to commit, I'll request that you use almost anything OTHER THAN allen-head screws. At least for me/my use, this will be a highly rust-prone area for a fastener, and an allan head is going to strip faster than about anything I can think of. If standard hex-head bolts are deemed undesirable/unacceptable, I'd at least request Torx-heads. Just not allens, please!

[typiper]

Please add me to the list, very interested!
2005 Baja Sport

[Skemcin]

Please add me to the list, very interested!
2005 Baja Sport

Got ya - thanks.

[Skemcin]

I'll post a deposit link late tonight. It will be $250 and will be refundable less paypal fees.

[Skemcin]

Here is the link to make your reservation for the bar.

[content moved to parent post]

We'll need 5 to give it an all clear.

[Skemcin]

### BUMP ###

We can throw in the powder coating FREE.

If we get no keepers by midnight - then we'll hold off on fitment and production until we can gather more interest.

[Skemcin]

1 committed - 3 more to go.

Thanks hyperjohnny.



If you want to hold off with the deposit until I get 4 PM commitments, that's fine ... send me a PM and lets keep building this list!

[Pow]

Just got the email blast from the forum admins about this. Not something I'm interested in but I have to say it looks sharp and solid, so thanks for making this available. Hope it happens for everyone!

[Cosmictech]

Please place me on the interest list.

Cosmictech

[Skemcin]

Just got the email blast from the forum admins about this. Not something I'm interested in but I have to say it looks sharp and solid, so thanks for making this available. Hope it happens for everyone!

Please place me on the interest list.
Cosmictech

Thanks guys - half way there!!!!

[das_fool]

count me in! woohoo!

2004 turbo (yeah you didn't ask for that...but man, it's fun!)