Obtaining Baja accessories
Moderator: mikenmel08
Obtaining Baja accessories
Has anybody had luck ordering Subaru Baja accessories online? Specifically, the bed bike-rack and plastic hood cover. I'm not sure I want to pay dealer prices, but that seems to be my only option. <br><br>I am also looking at fabricating my own bed bike-rack. if necessary.
Re: Obtaining Baja accessories
Getting the bed rack from Subaru dealerships is kind of expensive, The way I see it you have two options:<br><br>(1) you can cut a piece of wood so that it fits in the bed and then put a couple of fork clamps on it and that would be a cheap solution to the bike carrying dilema, or:<br><br>(2) you can get a roof rack (Thule, Yakima). If you go to a local bike shop you can have them vetrify they have the clamps that can be secured to the existing roof rack. <br> NOTE: this is obviusly the more expensive option, one rack with mounting bracket will cost anywhere from $80 to $150. But with a roof rack your bed will be freed up to carry more equipment without haveing to bang into your bike.
Re: Obtaining Baja accessories
[quote author=Grimm link=board=gen;num=1103586714;start=0#1 date=12/21/04 at 14:05:38]<br>(1) you can cut a piece of wood so that it fits in the bed and then put a couple of fork clamps on it and that would be a cheap solution to the bike carrying dilema, or:<br>[/quote]<br><br>This is exactly what I was thinking - I even just got an old bike rack from eBay to use as parts (for the fork clamps). I'll post pictures of my creation when I get done.<br>
- BajaBear
- Scoobytruck Contributer
- Posts: 33
- Joined: Thu May 05, 2005 4:09 pm
- Location: Sacramento, California
Nudge Bar
Has any1 installed a Westin safari light bar? I hella want 1!
Westin says the bars are universal & just the brackets are custom to each vehicle. They don't make them for Bajas so I'll get brackets made locally-No biggie.
BUT, these "universal" bars come in 3 lengths of approx 10",11",& 12" measured front to back.
Any suggestions?
Thanks
Westin says the bars are universal & just the brackets are custom to each vehicle. They don't make them for Bajas so I'll get brackets made locally-No biggie.
BUT, these "universal" bars come in 3 lengths of approx 10",11",& 12" measured front to back.
Any suggestions?
Thanks